How To Use Pressure Washer Floor Cleaner? Let’s get to know, that pressure washers are widely used in all spheres of human activity: from everyday life to agriculture and industry.
It is not a luxury for a long time, but, rather, a daily necessity for those who are used to keeping clean. A pressure washer floor cleaner is a tool quite multifunctional.
It is widely used in floor cleaning. Such a device can find a large number of applications both in the suburban area and for cars. Consider what to look for before buying such a device.
The principle of operation of the pressure washer cleaner is quite simple. A gasoline or electric engine drives a special pump, which creates the necessary pressure and ensures the supply of water to the hose. The resulting water pressure makes it easy to cope with various types of pollution.
A good washer can be used to wash a car, clean roofs, walls, or other surfaces, clean paths and sidewalks, etc.
For the machine to serve as long as possible and better, it is essential to follow some operating rules. They are advisory and are not mandatory, but can help you avoid many troubles.
A pressure washer has a much greater effect than a regular garden hose, but at the same time, it is much more dangerous and can cause harm or destroy your property. Before using such a machine, you need to learn how to work with it correctly.
How To Use Pressure Washer Floor Cleaner – A Guide for Beginners
Wear appropriate clothing
You must have safety glasses and appropriate safety shoes. Shoes should have a rubberized sole to avoid slipping on wet surfaces.
You should wear long pants and a shirt or a long-sleeved sweatshirt, so your hands are protected from flying dirt and other particles. If there are plants, protect them since they may be damaged put them aside or cover them.
Prepare the pressure washer for use
Fill the washer with fuel and oil. Take the starter and pull it towards you to start the washing engine. If your washer is powered by electricity, you must connect it to a grounded source of electricity.
Connect the water supply hose to the appropriate connector
In order to avoid damage to the pump, it is necessary to turn on the water supply before turning on the washing itself. If you need extra help when washing, then pour detergent into the bucket.
Connect the nozzle to the spray gun
You may need special nozzles to use the detergent. Read the user manual carefully before using the sink.
Hold the spray nozzle sixty centimeters from the subject before starting the wash.
Gradually move the sprayer closer. If you move the spray gun closer than thirty centimeters from the object, you risk damaging the property.
Hold the sprayer at a forty-five-degree angle to the subject
This will help direct loose pieces of dirt and other particles away from you. Trigger the trigger to start dispensing water.
Move the spray gun from side to side
No need to linger on one point for a long time.
Apply detergent, starting from the bottom and gradually moving up
Before you wash the product, let it soak the surface of the object for three minutes. Do not wait too long; otherwise, the detergent may dry out.
Wash the object with a sink, starting from above and gradually going down. Read the instruction manual to rinse the washing properly after using the detergent.
What To Consider While Using a Pressure Washer Floor Cleaner?
- If you use a pressure washer, you must hold the spray gun in a downward direction. Otherwise, water, under the influence of pressure, can get beyond the siding at the upper overlap point.
- Never use a pressure washer when you are on a stepladder. Better use a longer nozzle.
- Keep the pressure washer out of the reach of children. They can cause serious damage to themselves or property by mistakenly mistaking the high-pressure washer for a large water gun.
- Never point the sprayer toward parts of your body, other people, or animals.
- Do not use a gasoline washer indoors. Exhaust fumes can cause toxic poisoning.
- To avoid short circuits and electric shocks, it is necessary to keep the cable connecting the sink, extension cord, and all connections away from water.
What is Included in The Design of a Pressure Washer?
A pressure floor cleaner is a fairly simple mobile device that takes up little space. The main structural elements of this unit are:
- Electrical engine;
- pump with a motor circuit breaker;
- hose through which water is supplied;
- hose with a high-pressure pistol grip;
- housing with power cable;
- additional nozzles.
Pump
The unit of hydrodynamic cleaning can be installed as a piston, plunger, and any other pump. The efficiency of the entire high-pressure washer and its service life depends on the quality of the pump as a whole, and in particular, on the material of the pistons and piston chambers.
In low-cost models, single-piston pumps are more commonly used. And variants of devices of a more expensive price category, as a rule, are equipped with pumps with several plungers (pistons).
Another difference between the budget options of the unit is that the details of the piston group are made of plastic and do not differ in durability. The premium segment washers use ceramic pistons or made of alloy steel, and the body is made of aluminum alloy.
Moreover, in inexpensive models, the piston chambers, and the pistons themselves are highly compatible with each other. And the working surface of these parts is processed perfectly.
Electric Motor
An electric motor occupies almost the entire space inside the housing of a hydrodynamic cleaning unit. It also accounts for the bulk of the entire device.
Traditionally, an engine with brushes is installed in the sink. But there are units without brushes. Their fundamental difference is the development of a larger resource and less heat during operation.
One or two fans are installed on the motor axis. They are needed to cool the “heart” of the washing machine. In the case of using two fans, one draws in air from the outside, directing it along with the rotor. The second is used to drain hot air from the opposite end of the engine.
The shaft of the electric motor is connected to the gearbox. With its help, rotation from the shaft is transmitted to the pump (pump). In both cheap and expensive models of units, the gear housing is made of high-strength plastic.
Circuit Breaker and Hoses
The circuit breaker is connected to the pressure sensor and is an important element of the pump device. It is triggered when the sensor indicates an excess of the level allowed for operation, and the engine stops.
And as soon as the pressure begins to fall, the “heart” of the sink starts again. The process of resuming the water supply starts instantly.
The device of hydraulic cleaning device is such that two nozzles are connected to the pump: inlet and outlet.
The inlet pipe is connected with a hose to a source of water supply, which can be either a water supply system or a certain tank filled with water. A high-pressure hose with a pistol grip is connected to the outlet pipe.
Principle of Operation of a Pressure Washer
From this point of view, it can be described as follows. A high-speed jet destroys dirt adhering to the surface by mechanical action. Simultaneously with this process, the fallen parts of the pollution are washed off with water.
From a technical point of view, the principle of operation of a pressure washer can be described in a slightly different way. Water from the source enters the pump.
There, the fluid pressure increases to the required rate. And to the handle-gun, the water comes under pressure. Further, when the button is pressed, it is sprayed.
Thanks to various nozzles, the shape of the jet can be adjusted and changed. Parameters such as jet velocity and water flow are critical in determining the efficiency of the unit.
And not pressure, as many believe. It turns out that the selected nozzle directly affects the quality of work on cleaning surfaces.
The hoses also require care. Since the water in them flows under pressure, one should not allow kinks, or collisions with the wheel, and it is not necessary to walk along with it, as this can lead not only to damage to the hose but also to the failure of the wash.
It is advisable to buy a high-pressure washer that is equipped with an automatic or manual reel for winding a hose. This will significantly facilitate your use, and the hose will not get tangled under your feet.
At the end of washing, you need to drain the water from the device; if possible, you can blow it with a compressor.
If you use a pressure washer in the cold season, then such a step will also save it from damage, which usually leads to frozen water inside the device. Do not forget about the pump. At the end of work, release pressure.
Since a pressure washer has very high pressure, it should be used very carefully. Incorrect or careless washing can cause dents, and scratches.
Do not bring the nozzle with the jet too close to the surface, as the smaller the distance, the stronger the pressure. Also, do not direct people and animals.
Such an action can result in cuts and serious injuries. If you need to leave the pressure washer for a while, turn it off before you leave. Do not keep the sink on when not in use. This can become a cause of damage, and inadvertently traumatizing others.
Pressure washers, used at workplaces for many years, are now becoming increasingly popular in private homes. They work well both inside and outside the home. Their use is really wide.
A pressure washer can work perfectly when cleaning the facade of a building. It doesn’t matter what material it is made of. The sink will cope with the cleaning of both plaster brick and wood.
The facades get dirty at a fast pace, sometimes even so much that we begin to consider updating them. It is worth using pressure washers. After cleaning, you may find that repairs are no longer needed.
A pressure washer will also help you clean the floor efficiently. The floor, like the facade of the building, is constantly exposed to dirt.
Manual cleaning with a brush and water takes, firstly, a lot of time, and secondly, it is not entirely effective. A pressure washer allows you to clean the entire floor in a short time and with little work.
The next step where washing can help you is cleaning the driveways and paths. Cleaning them by traditional methods is usually carried out in several stages. First, we remove leaves, sand, or gravel, and then we remove mosses, lichens, and spots from automobile oil.
A pressure washer allows you to perform all these actions at the same time. Water discharged from it under high pressure can remove any dirt, including impurities, embedded in the ankles, stones, or boards.
Washing the machine can also be done quickly and without problems. If you have a pressure washer, you do not have to clean the machine for several hours or take it to the sink.
The stream of cleaning water effectively removes dirt and deposits from the body without damaging the paint. Just remember to use the correct water pressure.
Finally, a pressure washer will be an excellent solution when cleaning a garden, cleaning arbors, canopies, a pool, or other items of equipment. With it, you can also effectively clean your bike or motor.
Why is it Worth Using a Pressure Washer?
Describing the use of pressure washers, we have already brought closer the topic of the advantages of these devices. However, it is worth paying attention to the fact that, in addition to comfort and ease of use, they save water, which gives us double benefits.
This allows you to reduce bills and respect the natural environment. Besides, by cleaning with water under pressure, we can significantly reduce the use of chemical cleaners or even eliminate them.
A pressure washer floor cleaner is a great machine that makes floor cleaning easier. Therefore, you should look for this device and make your cleaning process easier.
You May Read Also